Top Controls And Indicators - Sanyo PLC-SE10 Owner's Manual

BEFORE OPERATION
This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top.
WARNING TEMP. INDICATOR
Flashes red when
internal projector
temperature is too
high. (P38)
LAMP REPLACE INDICATOR
Turns to yellow when
the life of the projection
lamp draws to an end.
(P39)
MENU BUTTON
Used to open or close
MENU operation. (P17,
18)
INPUT BUTTON
Used to select input
source. (P22, 30)
IMAGE BUTTON
Used to select image
level. (P27, 32)
16

TOP CONTROLS AND INDICATORS

VOLUME –
INPUT
IMAGE
MENU
POINT (VOLUME + / – ) BUTTONS
Used to select an item or adjust
value in ON-SCREEN MENU. They
are also used to pan the image in
DIGITAL ZOOM
+/–
POINT LEFT/RIGHT buttons are
also used as VOLUME +/– buttons.
ON -- -- OFF ON OFF
VOLUME +
ZOOM
SELECT
SELECT BUTTON
Used to execute the item
selected. It is also used
to expand / compress
mode. (P29) the image in DIGITAL
ZOOM mode. (P29)
POWER ON–OFF BUTTON
Used to turn the projector
on or off. (P19)
READY INDICATOR
Lights green when the
projector is ready to be
turned on. And it
flashes green in Power
Management mode.
(P36)
LAMP INDICATOR
Becomes dim when the
projector is turned on.
And bright when the
projector is in stand-by
mode.
FOCUS
FOCUS BUTTON
Used to adjust focus.
(P20)
ZOOM BUTTON
Used to adjust zoom.
(P20)