Troubleshooting Using The Ready Light - SMART Board SB640 Installation And User Manual

Chapter 5
Troubleshooting your interactive whiteboard
NOTE
Pressing and holding the Reset button for longer than three seconds clears any saved 4- or 9-point
orientation data from the controller module's memory, and the alignment defaults to factory settings.
Because 12- and 20-point orientation data is stored on your computer, however, this data is retained after
a reset. See Orienting your interactive whiteboard on page 32.

Troubleshooting using the Ready light

If you experience a problem with your interactive whiteboard, troubleshoot it by using the Ready light, in
conjunction with other observable symptoms and behaviors. Before you start troubleshooting, see The
ready light on page 41 to locate the Ready light, and then familiarize yourself with its states during normal
operation.
The following flowchart will help you to diagnose the issues and will direct you to the next stage in your
troubleshooting process.
smarttech.com/kb/001414 45