SMART Board SB640 Installation And User Manual page 34

Chapter 3
Connecting your interactive whiteboard to your computer
3. Beginning at the upper-left corner of the screen, touch the center of the target firmly with the tip of the
pen until the target moves to the next point. Try not to flick the pen when you lift it from the screen,
and make sure that the lift direction is at a right angle to the screen.
NOTE
Although you can use your finger to orient your interactive whiteboard, a fine-point tool such as a
pen tray pen provides greater precision when touching the targets.
4. Repeat step 3 until you arrive at the last point.
NOTE
If you aren't satisfied with the precision of a particular point, press the left arrow key on your
computer's keyboard to repeat the orientation for that point.
5. At the last point, touch the center of the target firmly and continue pressing until the message "Please
wait while Orientation completes" appears.
The orientation screen closes.
The orientation procedure can be 4, 9, 12 or 20 touches, depending on the precision setting you specify in
your SMART Board Settings in the SMART control panel. The following procedure shows you how to
change the precision setting.
To select a 4-, 9-, 12- or 20-point orientation procedure
1. Press the SMART software icon in the Windows notification area or Mac Dock, and then select Control
Panel.
2. Press SMART Hardware Settings.
smarttech.com/kb/001414 34