SMART Board 8000i-G5-SMP Series Quick Start Manual

SMART Board® 8000i-G5-SMP series
interactive flat panels
The SMART Board® 8000i-G5-SMP series interactive flat panels
feature SMART's proprietary DViT® (Digital Vision Touch)
technology and combine a premium touch experience with the
power of SMART Meeting Pro® software. These interactive flat
panels are also available with SMART kapp iQ™ functionality, which
provides simple and powerful digital whiteboarding.
Turning on the interactive flat panel
The interactive flat panel's presence detection sensor can detect
people up to 16' (5 m) away when the interactive flat panel is in
Standby mode. When the sensor detects people, the interactive
flat panel turns on. Touching the screen activates the interactive
flat panel.
The interactive flat panel returns to Standby mode when the
sensor doesn't detect people in the room for a while.
Press the Standby button
the interactive flat panel.
Control panel
on the front control panel to turn on
Connector panel
You can use the connector panel on the left side of the
interactive flat panel to connect a room computer, guest laptops
and other devices.
SBID8055i-G5-SMP
SBID8065i-G5-SMP
After you've connected computers and other devices to the
interactive flat panel, switch between these devices by pressing
the Input Select button
NOTE
For more information about connecting computers and other
devices, see the SMART kapp iQ Pro™ interactive flat panels
administrator's guide (smarttech.com/kb/171000).
The interactive flat panel is available with
functionality. You can use your mobile device to share
whiteboard sessions with others. Participants can contribute to
the whiteboard session from their computers or mobile devices.
To take advantage of SMART kapp iQ functionality, install the
AM30 appliance in the accessory slot located on the back of the
interactive flat panel.
SBID8065i-G5-SMP-V2
SBID8075i-G5-SMP
on the front control panel.
SMART kapp iQ
smarttech.com/kb/171088