SMART Board SB640 Installation And User Manual page 24

Chapter 2
Installing and securing your interactive whiteboard
IMPORTANT
Be aware that security cable locks are not designed to be a solid protection measure because the lock
can be torn out. However, potential thieves might be reluctant to try to sell a product with a broken
security cable lock hole, which would readily identify it as a stolen item.
To lock the pen tray to your interactive whiteboard
1. Before you secure your pen tray brackets to the wall as shown in step 3 on page 15, loop your security
cable behind the brackets.
2. Thread the lock end of the cable through the loop end of the cable.
3. Verify that the cable is tight enough that you can't remove the pen tray while the lock is in place, and
then install the pen tray.
4. Insert the prong end of the security cable into the lock slot, and then complete the pen tray installation
by securing it to the wall.
Securing the pen tray to the pen tray brackets
Since you can remove the pen tray without tools, you might want to securely attach it to its brackets. To do
this, insert two No. 8/M4 screws (not included) into the holes indicated in the following illustration.
IMPORTANT
Older units don't include this feature.
smarttech.com/kb/001414 24