SMART Board SB640 Installation And User Manual page 21

Chapter 2
Installing and securing your interactive whiteboard
To complete your installation
1. Below the bottom frame, you'll find two L-shaped metal brackets. In the center of each bracket there
is a metal tab. Push this tab back until it contacts the wall, and then mark the location of the mounting
holes with your pencil.
2. Remove your interactive whiteboard from the wall, and then use the screwdriver to secure a self-
tapping wall anchor at each mark.
NOTE
For a concrete wall, drill holes at the marks, and then insert concrete anchors into the holes.
smarttech.com/kb/001414 21