Table of Contents
Advertisement
Section 3 - Configuration
Motion detection enables the camera to monitor the video feed for movement. You can also enable motion detection via the PIR sensor.
Enable Video
Select this box to enable the video motion detection feature of your
Motion:
camera. Make sure you draw an area for the camera to monitor for motion.
Sensitivity:
Specifies how sensitive video motion detection will be from 0% to 100%.
A low sensitivity setting means that there must be large changes between
two images in order to detect motion, and a high sensitivity setting means
that even small changes will cause motion to be detected.
Drawing Mode:
Select Draw Motion Area to select the area of the picture to monitor for
movement to trigger recording or a snapshot. Use your mouse to click
and drag on the area that you would like to monitor for motion. Select
Erase Motion Area to clear a selected region and stop the camera from
monitoring that area of the picture.
Clear:
Clears all motion detection areas from the picture.
Click Save Settings to save your changes.
D-Link DCS-936L User Manual
Motion Detection
45
Advertisement
Table of Contents
