HIKVISION UD04701B User Manual page 158

1) Create the verification code and enter the code in the Verification Code text field.
2) Check the checkbox of The Hik-Connect service will require internet access. Please read
Service Terms and Privacy Statement before enabling the service.
3) Scan the QR code on the interface to read the Service Terms and the Privacy Statement.
4) Click OK to save the settings and return to the Hik-Connect interface.
Hik-Connect is disabled by default.

The verification code is empty when the device leaves factory.

The verification code must contain 6 to 12 letters or numbers and is case sensitive.

Every time you enable Hik-Connect, the Service Terms interface pops up and you should check the checkbox

before enabling it.
4. (Optional) Check the checkbox of Custom and input the Server Address.
5. (Optional) Check the checkbox of Enable Stream Encryption. After this feature is enabled, the verification
code is required for remote access and live view.
You can use the scanning tool of your phone to quickly get the code by scanning the QR code below.
Network Video Recorder User Manual
Figure 11. 3 Service Terms
Figure 11. 4 Hik-Connect Settings Interface
157