time for screen to be shown, mute or turning on the audio, the screen number for each channel, etc.
Steps:
1.
Enter the Live View Settings interface.
Menu > Configuration > Live View
The settings available in this menu include:
•
Video Output Interface: Designates the output to configure the settings for, and only VGA/ HDMI
selectable by default.
•
Live View Mode: Designates the display mode to be used for Live View.
•
Dwell Time: The time in seconds to dwell between switching of channels when enabling auto-switch in
Live View.
•
Enable Audio Output: Enables/disables audio output for the selected video output.
•
Volume: Adjust the volume of live view, playback and two-way audio for the selected output interface.
•
Event Output: Designates the output to show event video.
•
Full Screen Monitoring Dwell Time: The time in seconds to show alarm event screen.
2.
Setting Cameras Order
Select a View mode in
1)
Network Video Recorder User Manual
Figure 3. 7 Live View-General
Figure 3. 8 Live View- Camera Order
. Up to 36-screen display is supported for 32-ch NVR.
57
TM
is