Table of Contents
Advertisement
Make sure the camera to add has already been activated.
4.
(For the encoders with multiple channels only) check the Channel Port
shown in the following figure, and click OK to add multiple channels.
OPTION 3:
Steps:
1.
On the IP Camera Management interface, click the Custom Adding button to pop up the Add IP Camera
(Custom) interface.
2.
You can edit the IP address, protocol, management port, and other information of the IP camera to be added.
If the IP camera to add has not been actiavated, you can activate it from the IP camera list on the camera
management interface.
3.
(Optional) Check the checkbox of Continue to Add to add other IP cameras.
4.
Click Add to add the camera. The successfully added cameras are listed in the interface.
Refer to the following table for the description of the icons
Network Video Recorder User Manual
Figure 2. 30 Selecting Multiple Channels
Figure 2. 31 Custom Adding IP Camera Interface
Table 2. 1 Description of Icons
44
in the pop-up window, as
checkbox
Advertisement
Table of Contents
