Checking The Headlight Setting; Adjusting The Headlight Range - KTM 125 DUKE 2022 Owner's Manual

15 ELECTRICAL SYSTEM
15.8
15.9
84

Checking the headlight setting

400726-10

Adjusting the headlight range

F00850-10
400726-11
–
Park the vehicle on a horizontal surface in front of a light-
colored wall and make a mark at the height of the center of
the low beam headlight.
–
Make another mark at a distance
Guideline
B
Distance
–
Position the vehicle vertical to the wall at distance
the wall and switch on the low beam.
Guideline
A
Distance
–
The rider now mounts the motorcycle with luggage and passen-
ger if applicable.
–
Check the headlight setting.
The light-dark boundary must be exactly on the lower mark-
ing when the motorcycle is ready to be operated with the
rider mounted along with any luggage and a passenger if
applicable.
» If the boundary between light and dark does not meet
specifications:
–
Adjust the headlight range. (
Preparatory work
–
Check the headlight setting. (
Main work
–
1
Turn adjusting screw
Info
Turn clockwise to increase the headlight range; turn
counterclockwise to reduce the headlight range.
If you have a payload, you may have to correct the
headlight range.
1
Screw also secures the headlight. Ensure the screw
is always screwed in far enough.
–
Set the headlight to marking
Guideline
The light-dark boundary must lie exactly on lower mark-
B
ing when the motorcycle is ready to operate with the
rider mounted along with any luggage and a passenger if
applicable.
B
under the first marking.
5 cm (2 in)
A
5 m (16 ft)
p. 84)
p. 84)
to adjust the headlight range.
B
.
from