16.3
Checking the coolant level
Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
–
Do not open the radiator, the radiator hoses or other cooling system components if the engine or the
cooling system are at operating temperature.
–
Allow the cooling system and the engine to cool down before you open the radiator, the radiator hoses
or other components of the cooling system.
–
In the event of scalding, rinse the area affected immediately with lukewarm water.
Condition
The engine is cold.
–
Stand the motorcycle upright on a horizontal surface.
–
Remove cap
–
Check the antifreeze in the coolant.
−25 ... −45 °C (−13 ... −49 °F)
»
If the antifreeze in the coolant does not match the speci-
fied value:
–
Correct the antifreeze in the coolant.
–
Check the coolant level in the compensating tank.
F00764-10
The coolant level must be between the two markings.
»
If the coolant level does not match the specified value:
–
Correct the coolant level.
Coolant (
–
Mount the cap of the compensating tank.
–
Remove radiator cap
–
Check the antifreeze in the coolant.
−25 ... −45 °C (−13 ... −49 °F)
»
If the antifreeze in the coolant does not match the speci-
fied value:
–
Correct the antifreeze in the coolant.
–
Check the coolant level in the radiator.
The radiator must be filled completely.
F00763-10
»
If the coolant level does not match the specified value:
–
Check the coolant level and the reason for the loss.
Coolant (
»
If you had to add more coolant than the specified amount:
> 0.20 l (> 0.21 qt.)
–
Fill/bleed the cooling system.
–
Mount the radiator cap.
1
of the compensating tank.
p. 113)
2
.
p. 113)
(
COOLING SYSTEM 16
p. 89)
87