Running In The Engine; Loading The Vehicle - KTM 125 DUKE 2022 Owner's Manual

Hide thumbs Also See for 125 DUKE 2022:
Table of Contents

Advertisement

8.2

Running in the engine

During the running-in phase, do not exceed the specified engine speed.
Guideline
Maximum engine speed
During the first: 1,000 km (620 mi)
Info
During the running-in phase, the shift warning light is set to a specified value and cannot be changed.
Avoid fully opening the throttle!
8.3

Loading the vehicle

Warning
Danger of accidents Total weight and axle loads influence the handling characteristic.
The total weight consists of: operational motorcycle with a full tank, rider and, if necessary, a passenger
with protective clothing and helmet, and, if necessary, mounted luggage.
Do not exceed the maximum permissible overall weight or the axle loads.
Warning
Danger of accidents Improper mounting of cases, tank rucksacks or other luggage impairs the handling
characteristics.
Luggage mounted incorrectly can slip while the vehicle is in motion.
Mount and secure all luggage according to the manufacturer's instructions.
Check that your luggage is fixed properly at regular intervals.
Warning
Danger of accidents The luggage system will be damaged if it is overloaded.
Read the manufacturer information on maximum payload when mounting cases.
Warning
Danger of accidents Luggage which has slipped impairs visibility.
If the tail light is covered, you are less visible to traffic behind you, especially when it is dark.
Check that your luggage is fixed properly at regular intervals.
Warning
Danger of accidents A high payload alters the handling characteristic and increases the stopping
distance.
Adapt your speed to your payload.
If luggage is carried, ensure it is fixed firmly as close as possible to the center of the vehicle and ensure even
weight distribution between the front and rear wheels.
Do not exceed the maximum permissible weight and maximum permissible axle loads.
Guideline
Maximum permissible overall weight
Maximum permissible front axle load
Maximum permissible rear axle load
7,500 rpm
355 kg (783 lb.)
127 kg (280 lb.)
228 kg (503 lb.)
PREPARING FOR USE 8
41

Advertisement

Table of Contents
loading

Table of Contents