Table of Contents
Advertisement
[键入文字]
VI. Other instructions
1. Open door modes
Local control
1) Local Password
Set <Local Password> (the password is "6789" by default) via DOOR PHONE\DOOR PHONE as
above.
Input password via keypad and press the "#" key, then the door will be unlocked.
2) Private access code
Set <Add Access Rule\Access Code> and enable local authentication.
Input access code via keypad and press the "#" key, then the door will be unlocked.
Remote control
1) Visitors call the owner
Visitors can call the owner via position speed dial or phone number. (After setting the speed dial
key, visitors can press it to call direct.)
The owner answers the call and presses the "*" key to unlock the door for visitors.
2) Owner calls visitors
Owner calls visitors via SIP phone.
SIP door phone answers the call automatically.
Owner inputs corresponding <Access codes> via SIP phone keypad to unlock the door.
Swiping cards
Use pre-assigned RFID cards to unlock the door, by touching RFID area of the device.
Indoor switch
Press indoor switch, which is installed and connected with the device, to unlock the door.
2.
Management of card
1)
Administrator Table
<Issuer> and <Revocation>
47
/ 51
Advertisement
Table of Contents
