Setting Up Triggers On The X-Series Signal Analyzer - Keysight M9484C Getting Started And Troubleshooting Manual

Basic Measurements

Setting Up Triggers on the X-Series Signal Analyzer

Setting Up Triggers on the X-Series Signal Analyzer
1. From the X-Series Signal Analyzer Menu Panel (on the top right of the
If accessing the instrument via a Remote Desktop connection, select the
Screen tab (at the top of the display) to open the
Mode/Measurement/View Selector window.
2. Select Mode Preset to set Spectrum Analyzer mode to a known state.
3. From the drop-down on the top right, select Trigger and set Trigger
M9484C Measurement Guide
display), select Mode/Meas > Spectrum Analyzer mode.
Source to Free Run.
11