Quick Start
Verify Operation of the Signal Generator
Verify Operation of the Signal Generator
To verify the operation of the M9484C VXG, run a Self Test and Internal
Alignments.
Run a Self Test
Refer to the
the front and rear panel connectors.
1. From the M9484C application, select the Triple-bar icon (top left corner)
2. Select the Service tab > Self Test > Run Self Test.
18
"Front and Rear Panel Features" on page 25
and then select Settings.
The self test takes 5 to 10 minutes to complete.
for a description of
M9484C Startup Guide