Original instructions
Chapter 1: Introduction
About This Manual
This manual is designed to help you learn how to install, use, and maintain your
laboratory fume hood. Instructions for installing optional equipment on your hood
are also included.
Chapter 1: Introduction provides a brief overview of the laboratory fume hood,
explains the organization of the manual, and defines the typographical conventions
used in the manual.
Chapter 2: Prerequisites explains what you need to do to prepare your site before
you install your laboratory fume hood. Electrical and service requirements are
discussed.
Chapter 3: Getting Started contains the information you need to properly unpack,
inspect, install, and certify your laboratory fume hood.
Chapter 4: Performance Features and Safety Precautions explains how the
Protector operates and the appropriate precautions you should take when using the
fume hood.
Chapter 5: Using Your Protector XL discusses the basic operation of your fume
hood. Information on how to prepare, use and shut down your Protector Hood are
included.
Chapter 6: Maintaining Your Protector XL explains how to perform routine
maintenance on your fume hood.
Chapter 7: Modifying Your Protector XL explains how to modify the fume hood or
add accessories.
Chapter 8: Troubleshooting contains a table of problems you may encounter while
using your laboratory fume hood including the probable causes of the problems
and suggested corrective actions.
Appendix A: Protector XL Components contains labeled diagrams of all of the
components of the fume hoods.
Appendix B: Protector XL Dimensions contains comprehensive diagrams showing
all of the dimensions for the laboratory fume hoods.
Appendix C: Protector XL Specifications contains the electrical requirements for
laboratory fume hood. Wiring diagrams are also included.
Appendix D: Protector I-S Hood provides information relating to the automatic
Intelli-Sense Blower 3-speed operation.
Product Service 1-800-522-7658
2
Need help?
Do you have a question about the Protector XL 1110 Series and is the answer not in the manual?