Decorative Barrier Front Dimension Diagrams - Heat&Glo 6KX-CU Installation Manual

B. Decorative Barrier Front Dimension Diagrams
PORTRAIT DECORATIVE BARRIER FRONTS
IMPORTANT! This fireplace requires an installed decorative barrier front to prevent direct contact with the hot
viewing glass. DO NOT operate the fireplace with the barrier removed.
Decorative barrier front must be ordered at time of fireplace purchase. If decorative barrier front is not present,
contact dealer.
WARNING! Risk of Overheating! DO NOT install combustible or non-combustible flooring or hearth material above
top of bottom surround. Gap between bottom of decorative front and top of bottom surround must be maintained for
proper air flow.
Note: See Section 10 for hearth, mantel and finishing requirements, including complete information for combustible
and non-combustible mantels.
BOTTOM OF COMBUSTIBLE MANTEL
BOTTOM OF COMBUSTIBLE MANTEL
PASSIVE HEAT INSTALLED
6KX PORTRAIT-6
8KX PORTRAIT-8
6KX PORTRAIT-6
8KX PORTRAIT-8
Figure 3.2 Decorative Barrier Front Dimensions - PORTRAIT
Heat & Glo • 6KX, 6KX-LP, 8KX, 8KX-LP Installation Manual • 2583-980 • Rev. C • 5/23
12
H
I
TOP OF APPLIANCE
OPENING
J
E
D
A
in. 36-1/16
mm 917
in. 43-1/16
mm 1094
H
Minimum Combustible Mantel Height
at 12 Inch Mantel Depth
(No Passive Heat)
in. 29
mm 737
in. 29
mm 737
A
Barrier Mesh:
Integral to
Decorative Barrier Front
B C D
29-3/16 39-5/16 1-5/8
741 999 41
31-3/16 46-5/16 1-5/8
792 1176 41
Minimum Combustible Mantel Height
at 12 Inch Mantel Depth
with Passive Heat Installed
B
C
E F
3-5/16 32-7/16
85 824
3-5/16 34-7/16
85 875
I
6
152
6
152
F
G
G
34-1/8
867
36-1/8
918
J
Bottom of
Appliance to
Top of Bottom
Surround
1-1/8
29
1-1/8
29