Step 1: Connect Devices - JAI GO-2400M-PMCL-1 User Manual

GO-2400M-PMCL-1 | GO-2400C-PMCL-1 | User Manual (Ver. 1.0)
This camera fully supports applications written using GenICam-based SDKs. The advantage of this is
that programs written using GenICam names can be applied with little or no modification to control
cameras with other GenICam-compliant interfaces and even GenICam compliant cameras from
different vendors.

Step 1: Connect Devices

① Lens
② Direct Mounting (or Use MP-43 Tripod Adapter Plate)
③ Camera Link Cable
④ Frame Grabber Board
⑤ DC IN / Trigger IN Connection Cable
⑥ AC adapter (Power Supply, If Necessary)
- 19 -
Preparation