Configuring With The Wbm; Starting Wbm - Siemens SIMATIC RF1100 Operating Instructions Manual

Configuring with the WBM

The readers are equipped with a Web server that provides Web Based Management (WBM) to the
Web client for configuring the readers. The WBM can be called via the Web browser of a PC/
laptop.
The WBM server provides the Web client (PC/laptop) with the parameter data of the reader
and accepts parameter changes from the Web client. Note that changed parameter values are
not automatically transferred to the reader. You must always manually transfer changes in
the configuration to the reader.
Hereafter, the term "WBM" is used to represent the WBM interface displayed in the Web
browser.
WBM
Figure 7-1
7.1

Starting WBM

Requirement
The reader is connected, turned on and ready for operation and the reader has been assigned an
IP address.
You can call WBM using the versions of the following Web browsers current at the time of
publication of this manual: Microsoft Edge, Mozilla Firefox and Google Chrome. The user
interface of the WBM is designed for a screen resolution of at least 1366 x 768 pixels.
NOTICE
Aborting of diagnostics due to open browser tabs
Note that some Web browsers stop updating Web pages when other tabs are in the foreground.
This behavior may cause ongoing diagnostics to be ended.
SIMATIC RF1100
Operating Instructions, 08/2023, C79000-G8976-C698-02
Design and function of the WBM
7
33