Table of Contents
Advertisement
Redback® A 4565B Evacuation Controller
4.2.2 Backlight Settings
Press the "backlight" button to display the screen shown in figure 4.3.
3
4
There are two levels of screen brightness which come into effect, when the screen hasn't been touched for a period of
time set by the user.
This menu screen allows the user to select the active screen brightness level, the dimmed brightness level and timeout
periods for the transition from active screen mode to dimmed mode, and the transition period from dimmed mode to
screen off mode.
1
Active Screen Brightness Level - Use this slider to adjust the brightness level of the active screen.
2
Dimmed Screen Brightness Level - Use this slider to adjust the brightness level of the dimmed screen
3
Active Screen to Dimmed Mode transition time - Use these buttons to adjust the timeout period to enter
dimming mode (set to 0 for the screen to be remain always on).
4
Dimmed Mode to screen Off transition time - Use these buttons to adjust the timeout period from
dimmed screen mode to the screen turning off completely (This is unavailable if the dimming mode is set to zero).
4.2.3 PIN Access - Set an optional access PIN preventing unauthorised access to the wallplates settings. Type in a preferred
PIN and press "E" to accept. Press "C" to delete PIN digits or to reset the PIN (For access without a PIN, delete all PIN dig-
its). Once complete press the BACK button and the change will take effect.
4.2.4 Installer label - Allows you to customise an installer label which is displayed on the top of the main screen.
Use the displayed keyboard to enter the label and press enter.
24
Redback® Proudly Made In Australia
Level
+H
+M
+S
100%
0 H
0 M
30 S
-S
-H
-M
+H
+M
+S
0 H
2 M
0 S
Dim Level
43%
-H
-M
-S
Fig 4.3 - Backlight Settings Screen.
Set Full-brightness level
and Full -> Dim transition time.
Set Dim-brightness level
and Dim -> Off transition time.
Back
www.redbackaudio.com.au
1
2
Advertisement
Table of Contents
