System Settings - Redback A 4565B Operating Manual

4.2.1 System Settings

The System settngs screen is shown in figure 4.2.
1 Audible Feedback - Allows you to enable/disable the audible feedback (in built speaker) on button presses and
set the volume. Press the button to enable/disable and use the slider below to adjust the feedback volume.
2 Restart unit - This will cycle power to the A 4565B and re-start the unit. Handy if the unit is locked away.
3 Factory reset - This will reset the unit back to it's default settings. This option is also required to re-assign the
paging console address (Press the factory reset button, tap confirm and a prompt will appear for the units
address. Select the required address (which can be any number from 1-8). If any settings need saving before the
factory reset, use the Export Settings option below.
4 Export Settings - This feature allows the settings of the unit to be transferred to another unit or kept as a back
up. Simply insert a Micro Sd card into the unit and follow the prompts.
5 Import Settings - This feature allows the settings of the unit to be imported from another unit. Insert a Micro SD
card and follow the prompts.
www.redbackaudio.com.au
Redback® A 4565B Evacuation Controller
1
2
Audible
Restart
Feebback
unit
ENABLED
Feedback Vol
0dB
Zone Lock
Fig 4.2 - System Settings Screen.
3 4
Factory Export
Reset Settings Settings
Export & Import all settings
(except unit address)
to/from SD card
Redback® Proudly Made In Australia 23
5
Import
Back