Table of Contents
Advertisement
Redback® A 4565B Evacuation Controller
3.3 A 4578 Remote Plate
The A 4578 wall plate allows a remote means of triggering the Alert and
Evacuation tones and the cancel function. The switches are momentary
operation and must be pressed for up to 3 seconds to activate. The switches
have protective "flip up" covers to prevent accidental operation.
If the A 4578 has a connection problem with the A 4565B main unit the
LED on the wall plate will flash.
Remote triggering is only available when the A 4565B is in "Auto" mode
which is selected by the key switch on the front of the A 4565B.
If the Alert and Evac switches on the A 4578 are pressed when the A 4565B
main unit is in "Manual" or "Isolate" mode, nothing will happen. If the
Alert and Evac switches are pressed on the front of the A 4565B while in
"Manual" mode the Alert and Evac switches on the A 4578 wall plate will
illuminate. An LED on the wall plate will illuminate when the A 4565B main unit is in "Manual" or "Isolate" mode to alert
the user that the wall plate is inactive.
3.4 A 4581 and A 4581V Remote Plates
the key switch on the front of the A 4565B. If the Alert, Evac and Bell switches on the
A 4581/V are pressed when the A 4565B main unit is in "Manual" or "Isolate" mode, noth-
ing will happen. If the Alert, Evac and Bell switches are pressed on the front of the A 4565B
while in "Manual" mode the Alert, Evac and Bell switches on the A 4581/V wall plate will
illuminate. The LED on the wall plate will illuminate when the
A 4565B main unit is in "Manual" or "Isolate" mode to alert the user that the wall plate is inactive.
3.5 A 4597 Remote Plate
The A 4597 wall plate provides the means to remotely operate the Fire Test
and Fire Alarm tones of the A 4565B.
The switches are momentary operation and must be pressed for up to 3
seconds to activate. The switches have protective "flip up" covers to prevent
accidental operation.
There are two RJ45 ports on the rear of the A 4597 wall plate, either of
which can be used.
If the Fire Test and Fire Alarm switches on the A 4597 are pressed when the
A 4565B main unit is in "Manual" or "Isolate" mode, nothing will happen.
NOTE: The FIre Test tone cannot be triggered by any other means than the
A 4597 wall plate. The Fire tone can also be triggered by the contact on the
rear of the A 4565B.
18
Redback® Proudly Made In Australia
The A 4581 and A 4581V wall plates provide a
remote means of triggering the Alert, Evacua-
tion and Bell tones and the cancel function. The
switches are momentary operation and must
be pressed for up to 3 seconds to activate. The
Alert and Evac switches have protective "flip
up" covers to prevent accidental operation.
If the A 4581/V has a connection problem with
the A 4565B main unit the LED on the wall
plate will flash.
Remote triggering is only available when the A
4565B is in "Auto" mode which is selected by
www.redbackaudio.com.au
Advertisement
Table of Contents
