Download Print this page

Marantz AV 10 Owner's Manual page 274

Av preamplifier
Hide thumbs Also See for AV 10:

Advertisement

Contents
Connections
Desired sound does not come out
The volume does not increase.
The maximum volume is set too low. Set the maximum volume using "Limit" on the menu. (v p. 182)
0
Appropriate volume correction processing is performed according to the input audio format and settings, so the volume may not reach the upper limit.
0
The volume of Bluetooth headphones does not decrease.
Bluetooth headphones volume cannot be adjusted from this unit. Use a Bluetooth headphones with volume adjustment.
0
No sound comes out with the HDMI connection.
Check the connection of the HDMI connectors. (v p. 66)
0
When outputting HDMI audio signals from the speakers of a power amp connected to this unit, set "HDMI Audio Out" in the menu to "AVP". To output
0
from the TV, set it to "TV". (v p. 188)
When using the HDMI Control function, check that the audio output is set to the AV amplifier on the TV. (v p. 151)
0
When an eARC function-compatible television is connected, television audio is not output from the speaker connected to this unit
eARC function settings may be required depending on the eARC function-compatible television you are using. Make sure eARC is set to on if this
0
setting exists on your television. For more information, check your television's owner's manual.
Make sure the input source of this unit is "TV Audio".
0
The eARC function does not operate when the HDMI input connector is set to the "TV Audio" input source. To enable eARC function operation, remove
0
the HDMI input connector setting, then restart this unit and the television. (v p. 200)
Front panel
Display
Playback
Settings
274
Rear panel
Tips
Remote
Index
Appendix

Advertisement

loading