Advertisement
Contents
Connections
Playback in ZONE2/ZONE3
Z3
Z2
Input source
select buttons
:
Front panel
Display
Playback
1
2
X
3
VOLUME no
no
0 Setting the input source of ZONE2 as the "Source" allows you to play the same
0 As well as ZONE2, you can play the same content of MAIN ZONE when the input
166
Rear panel
Settings
Tips
Press Z2 or Z3 to select the operating zone with the
remote control.
The indicator for the selected zone is lit.
Press POWER X to turn on the ZONE2 or ZONE3 power.
The multi zone power indicator on the display lights.
Power in ZONE2 or ZONE3 can be turned on or off by pressing
0
ZONE2 ON/OFF or ZONE3 ON/OFF on the main unit.
Press the input source select button to select the input
source to be played.
The audio signal of the selected source is output to ZONE2 or
ZONE3.
To perform an operation with the main unit, press ZONE2
0
SOURCE or ZONE3 SOURCE. Each time you press ZONE2
SOURCE or ZONE3 SOURCE, the input source changes.
content in MAIN ZONE and in ZONE2, regardless of the type of input signal.
0 Set the input source of ZONE2 as the "Source" by pressing the ZONE2
SOURCE button on the main unit.
0 If the MAIN ZONE input source is changed while ZONE2 is selected as the
"Source", then ZONE2's input source will be changed to mirror the MAIN
ZONE's input source.
source of ZONE3 is set as "Source".
Remote
Appendix
Index
Advertisement
