Advertisement
Contents
Connections
Remote lock function
When connecting an IR receiver, enable the Remote lock function. When
the function is enabled, you can not perform operations with the remote
control unit.
By default, this function is disabled.
X
STATUS
Front panel
Display
Playback
INFO
ENTER
Cursor Up/Down
Rear panel
Settings
Disabling the sensor function of the
remote control unit
1
Press X while you press and hold STATUS and INFO
with the unit in standby mode.
2
Use cursor Up/Down to select "RC LOCK On".
3
Press ENTER to enter the setting.
The infrared light receiving function is disabled.
Enabling the remote sensor function
1
Press X while you press and hold STATUS and INFO
with the unit in standby mode.
2
Use cursor Up/Down to select "RC LOCK zOff".
(z The currently set mode.)
3
Press ENTER to enter the setting.
Infrared light receiving function on the main unit is enabled.
160
Remote
Tips
Appendix
Index
Advertisement
