Advertisement
Contents
Connections
o Low Pass Filter
Selects the low pass filter cutoff frequency for the tactile transducer
output.
40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz /
180 Hz / 200 Hz / 250 Hz (Default: 80 Hz)
The "Low Pass Filter" are reflected in all input sources.
0
Front panel
Display
Playback
Settings
Speaker Preset
Two speaker settings can be saved to suit the environments where you
use your speakers.
For example, you can configure two presets easily to switch between
equalizer or speaker settings measured using Audyssey
characteristics of your room differ depending on factors such as whether
you use the screen.
If you want to use a preset, select the preset you want to use and then
configure settings such as Audyssey
save those settings to the preset you have selected.
Speaker Preset 1
(Default):
Speaker Preset 2:
0 The following settings are saved to presets.
0 "Amp Assign" settings
0 "Speaker Configuration" settings
0 "Distances" settings
0 "Levels" settings
0 "Crossovers" settings
0 "Bass" settings
0 "2ch Playback" settings
0 "Front Speaker" settings
0 "MultEQ
0 "Graphic EQ" data
0 This setting also be configured using "Speaker Preset" in the option menu.
(v p. 136)
242
Rear panel
Tips
®
Setup or the speaker settings to
Saves the settings to Preset 1.
Saves the settings to Preset 2.
XT32" data
®
Remote
Index
Appendix
®
Setup if the
Advertisement
