Advertisement
Contents
Connections
o Distance FL / Distance FR
Set distance from main listening position to speaker.
0.0 ft – 60.0 ft (Default: 12.0 ft) /
0.00 m – 18.00 m (Default: 3.60 m)
0 Set the difference in the distance between the speakers to less than 20.0 ft
(6.00 m).
o Level FL / Level FR
Adjust the level of each channel.
-12.0 dB – +12.0 dB (Default: 0.0 dB)
Front panel
Display
Playback
Settings
Tactile Transducer Setup
Set the level and low pass filter cutoff frequency when using tactile
transducers.
o Tactile Transducer
Sets the tactile transducer option.
Enabled:
Disabled
(Default):
0 For Tactile Transducer connections, use the Subwoofer 4 PRE OUT
connector.
0 This can not be set when "Speaker Configuration" - "Subwoofer" is set to "4
spkrs".
o Level
Adjusts the volume of the tactile transducer output.
–12.0 dB – +12.0 dB (Default : 0.0 dB)
0 The "Level" are reflected in all input sources.
0 If you wish to adjust the tactile transducer level for each input source, carry out
the settings in "Tactile Transducer". (v p. 133)
241
Rear panel
Tips
Enables tactile transducers.
Disables the tactile transducers.
Remote
Index
Appendix
Advertisement
