Advertisement
Contents
Connections
o Subwoofer Output
Selects which low frequency signals are sent to the subwoofer outputs.
LFE
(Default):
LFE + Main:
0 This can be set when "2ch Playback" - "Subwoofer" is set to "Yes".
Front panel
Display
Playback
When "2ch Playback" - "Front" is set to
"Large", only LFE signals are output from
the subwoofer. Also, when "2ch
Playback" - "Front" is set to "Small", the
front channel low range signals are
added to the LFE signals and output from
the subwoofer.
The front channel low range signal is
added to the LFE signal output from the
subwoofer.
Rear panel
Settings
o Crossover
Set the maximum frequency of the bass signal output from each
channel to the subwoofer.
40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz /
180 Hz / 200 Hz / 250 Hz (Default: 80 Hz)
0 This can be set when "2ch Playback" - "Subwoofer" is set to "Yes".
0 When "2ch Playback" - "Front" is set to "Large" and "Subwoofer Output" is set
to "LFE", "Full Band" is displayed and this cannot be set.
o LFE Distribution
Adjusts the amount of LFE signal sent to the large front speakers.
Off
(Default):
–20 dB – 0 dB
0 This setting cannot be set when "2ch Playback" - "Front" is set to "Small".
240
Remote
Tips
Appendix
Front Speakers do not play LFE signals.
Adjusts the amount of LFE signal sent to
the front speakers
Index
Advertisement
