Advertisement
Contents
Connections
o Auro-3D Mode
Select how to output sound to all speakers when Auro-3D decoding is
active.
Channel Expansion
(Default):
Direct:
0 You can set this when the input signal contains Auro-3D signal and sound
mode is set to Auro-3D.
o Speaker Select
Selects which speakers output sound, depending on the current sound
mode.
Floor:
Floor & Height
(Default):
0 This can be set when the sound mode is the original sound mode.
Front panel
Display
Playback
Incoming Auro-3D content is expanded to
additional speakers. All speakers
configured for Auro-3D will output sound.
Incoming Auro-3D content is sent directly
to each corresponding channel. No
content is sent to additional speakers.
Plays back without height speakers.
Plays back with height speakers.
Rear panel
Settings
o Subwoofer
Turn subwoofer output on and off.
On
(Default):
Off:
0 You can set this when the sound mode is "Direct" or "Stereo" and in the menu
"Subwoofer Output" is set to "LFE + Main". (v p. 237)
o Set Defaults
The "Surround Parameter" settings are returned to the default settings.
180
Remote
Tips
Appendix
The subwoofer is used.
The subwoofer is not used.
Index
Advertisement
