Advertisement
Contents
Connections
Listening to FM/AM broadcasts
1
Connect the antenna. ("Connecting FM/AM
antennas" (v p. 76))
2
Press TUNER to switch the input source to "Tuner".
G TV screen H
Tuner
CH 1
Tune
G Display of this unit H
01 FM
92 . 10MHz
3
Press OPTION.
The option menu screen is displayed.
4
Use cursor Up/Down to select "FM/AM", then press
ENTER.
This displays the reception band input screen.
Front panel
Display
Playback
Now Playing
STEREO
AUTO
FM 92.10 MHz
OPTION
Preset
Option
Rear panel
Settings
5
Use cursor Left/Right to select "FM" or "AM", then
press ENTER.
FM:
AM:
6
Press TUNE + or TUNE – to select the station you want
listen to.
Scanning is performed until it finds an available radio station. When
it finds a radio station, it stops the scan automatically and tunes in.
0 The modes for receiving FM broadcasts consists of "Auto" mode that automatically
searches available broadcast stations and "Manual" mode that lets you tune in
using buttons to change the frequency. The default setting is "Auto". You can also
use "Direct Tune" to tune in by entering the frequency directly.
In "Auto" mode, you cannot tune in to radio stations if the reception is not good.
If this is the case, then use the "Manual" mode or "Direct Tune" mode to tune in.
Operation buttons
TUNE +, –
CH/PAGE ml
Cursor Up/Down
Cursor Left/Right
101
Remote
Tips
Appendix
When listening to an FM broadcast.
When listening to an AM broadcast.
Function
Selects the radio station (up/down)
Selects preset radio stations
Selects the radio station (up/down)
Selects preset radio stations
Index
Advertisement
