Advertisement
Contents
Connections
8
Move the Sound calibration microphone to position 2,
select "Continue", then press ENTER.
The measurement of the second position starts.
Measurements can be made in up to eight positions.
Audyssey Setup
Place the microphone at the ear level of the listener
seated at the 2nd listening position, which should be no
more than 2 ft (60 cm) away from the 1st listening
position, then select "Continue ...
Ear Height
• • • • • • • • • •
Back
n Stopping Audyssey
A Press BACK to display the popup screen.
B Press cursor Left to select "Yes", then press ENTER.
Front panel
Display
Playback
2
Continue
Setup
®
Rear panel
Settings
9
Repeat step 8, measuring positions 3 to 8.
0 To skip measuring the fourth and subsequent listening position, press
cursor Left to select "Complete" and press ENTER to proceed to step 11.
10
Select "Continue", then press ENTER.
Audyssey Setup
Measurements complete.
Select "Continue" to analyze the data...
Repeat Last Test
Start the analysis and storage of the measurement results.
Analysis takes several minutes to complete.
0
The more speakers and measurement positions that there are,
the more time it takes to perform the analysis.
NOTE
0 When the measurement results are being saved, make sure the power is
not turned off.
209
Remote
Tips
Appendix
Continue
Index
Advertisement
