Led Backlighting - Loewe Reference lD 55 User Manual

Reference ID 40-55
User guide

LED backlighting

LED backlighting
(1
The LED backlighting turns your TV set into a shining decoration
object.
The LED backlighting is temporarily controlled via the local control of
the TV or the remote control.
The function of the LED backlighting is reset to the default of the
general preset of System settings
light module as soon as the TV set changes its operating mode
(switching on or off). See chapter System settings, section LED
light module for further information.
For playback of movies in 3D mode we recommend to disable the
LED backlighting (1 (see chapter System settings, section Picture
– 3D settings).
When activating the LED backlighting with TV set switched off
(standby mode), further operation commands will only be handled
after several seconds.
Controlling the LED backlighting via the local control
– VOL +
Press briefly: Switch the LED backlighting temporarily
on/off.
Press longer: Change brightness of the LED backlight-
As long as you keep the
is in an endless loop alternately reducing the lighting to
its minimum and then increasing it to the maximum
again.
When desired brightness is reached:
Release the
Controlling the LED backlighting via the remote control
Press briefly: Switch the LED backlighting temporarily
on/off.
When backlighting is active and when there are no
further on-screen menu displays:
Increase / decrease brightness of the LED
backlighting.
(1 Depending on the type of TV set.
Control more ...
MENU RADIO
ing (dim the lighting).
key depressed, the display
key.
LED
19