Devices On Av - Loewe Reference lD 55 User Manual

Reference ID 40-55
User guide
External devices

Devices on AV

An additional device such as a DVD player, VCR/DVD recorder etc.
can be connected to the TV set by means of an adaptor at the AV
socket. The required Scart adaptor is part of the adaptor set. The
adaptor set is available as an accessory from your Loewe dealer (see
chapter Accessories).
The AV sockets can process different signal types. Which signal type
your accessory device provides can be found in the operating manual
of the appropriate device.
Owing to the large number of AV devices available on the market, we
can only mention a few examples for the connection of accessory
equipment to the AV sockets here.
If the sound of the device connected to an AV socket is to be transmit-
ted digitally, a cinch cable must be plugged between the coaxial digital
output of the auxiliary equipment and the SPDIF IN socket of the TV
set. In addition, the digital audio input must be assigned to the appro-
priate AV socket. This is done via System settings
Assign digital audio input.
Remote TV switch on via Digital Link
You can select whether the TV set is to switch on automatically from
Standby mode if a disc is played or a screen menu displayed on a
Digital Link Plus-enabled device connected to AV.
You can find the settings in the System settings
Digital Link Remote switch on of TV set.
(1 Adaptor set is available as an accessory (see chapter Accessories).
128
Connecting a DVD player to the TV set
A DVD player has been selected in the System settings
connecting settings
Switch off all devices before connecting them.
Connect the Scart output of the DVD player to the TV set's AV socket
using the Scart adaptor
Plug the adaptor plug into the AV socket of the TV set so that the arrow
on the plug is visible.
Use a fully equipped Scart cable (available from your dealer) for this.
Connections
DVD-Spieler
AV
Connections
Playback from AV device
If the device at AV supports the Digital Link Plus functionality or if in
the System settings
Allow switching voltage
to the corresponding AV input after starting the replay at the AV device.
The AV input can also be called manually, however.
Device at connection AV.
(1
.
AV
Connection example of a DVD player
Connections AV connecting settings
yes, the TV set will automatically switch
Call AV list.
AV list
5 AV
6 AVS
7 PC IN
8 8 VIDEO VIDEO
9 SPDIF
Select AV,
OK switch over.
Start playback on the connected device.
AV
TV-Gerät
Note: If you press for
OK
at least two seconds to
switch to the selected
channel, the screen
switches off and you will
only hear the sound.
With the button
(green), you can switch
the screen back on and
off.