Digital Link Hd - Loewe Reference lD 55 User Manual

Reference ID 40-55
User guide
External devices
Operation of Digital Link HD (HDMI CEC) enabled devices
For playback with an external Digital Link HD enabled device connected
to the HDMI socket of the TV set, user commands are transmitted to
the external device with a few exceptions (volume, sound on/off). You
will also be informed by an on-screen display as soon as you switch to
the corresponding HDMI input.
Pressing briefly TV switches to TV mode (back to
previous station).
Pressing TV for a longer period switches between
HDMI and TV operation.
A message on the screen informs you about the
currently selected mode.
Automatically switching off external devices
When returning to TV mode by briefly pressing the TV key (see above)
the external device can be switched off.
You can find the settings in the System settings
Digital Link Shutdown of the ext. device via TV-button.
Menu item only available if at Digital Link HD - Functionality
on has been selected.
Remote TV switch via Digital Link
You can select whether the TV set is to switch on automatically from
Standby mode if a disc is played or a screen menu displayed on a
Digital Link HD-enabled device.
You can find the settings in the System settings
Digital Link Remote switch on of TV set.
Menu item only available if at Digital Link HD - Functionality
on has been selected.
Switching off the TV set and connected devices (system
standby)
The operation of the TV set must be enabled (see above).
Press the key long: TV set and all CEC-enabled devices
connected to the HDMI ports will be switched off to
standby (system standby).

Digital Link HD

Digital Link HD (HDMI CEC)
The Digital Link HD (HDMI CEC) system operation allows Loewe
television sets to transmit the remote control signals via the HDMI
connection of a TV set to compatible HDMI devices, such as e.g. Lo-
ewe AudioVision. You can therefore set up a concealed CEC capable
HDMI device.
Concealed installation of HDMI devices
To this end, first assign the HDMI CEC function with Code 22 to the
required device key (STB, VIDEO or AUDIO) as described in chapter
External devices, section Setting the remote control for other
Loewe devices.
Now assign the Digital Link HD function to the used HDMI device.
Assign HDMI device
Connections
Connections
The CEC capable HDMI device is connected to one
of the HDMI sockets of the TV set and switched on.
Press required button for 5 seconds.
A selection menu appears on the TV set.
Select HDMI device for key
Select HDMI device for key
No device
BluTech Vision
Cancel
Select required device from the list.
OK Accept.
From now on, the commands of the remote control are
communicated from the TV set to the HDMI device, if
the corresponding device button (STB, VIDEO or
AUDIO) has been pressed previously.
Back
127