Operating Loewe Units - Loewe Reference lD 55 User Manual

Reference ID 40-55
User guide
External devices

Operating Loewe units

Using the remote control for the TV mode of the TV set
Press the TV key, the LED above it will light for approx.
5 seconds.
Using the remote control for a Loewe recorder
Press the STB key, the LED above it will light for approx.
5 seconds.
Using the remote control for a Loewe player
Press the VIDEO key, the LED above it will light for
approx. 5 seconds.
Using the remote control for the radio mode of the TV set
Press the AUDIO key, the display above it will light for
approx. 5 seconds.
As long as a key is pressed, the LED for the selected operating mode
lights up (TV – STB – VIDEO – AUDIO). This allows you to check
which operating mode the remote control is set to every time you
press a button.
The factory setting of the keys is described above (see also table in
right hand column). The assignment of the buttons can be changed
to suit the existing accessory devices (see right hand column).
Set unit for sound control function on the remote control
The keys for the sound control functions Volume (
1
( ) are programmed ex-factory to interact with the TV set. The unit to
be operated can be modified.
The device must first be placed on one of the device key of the
remote control (see right column) before the tone-control functions
can be changed to the appropriate device.
Press the TV key and the numerical key simultane-
ously for minimum 5 seconds. The LED above the
selected TV key flashes twice.
Function Buttons
TV + 3
TV + 4
Audio
TV + 5
Functions
TV + 6
134
10
) and Sound on/off
Unit
Auro/AudioVision/MediaVision 3D
Mediacenter
Loewe TV
Loewe TV with sound projector with-
out system connection
Setting the remote control for other Loewe devices
You can operate various Loewe devices with the remote control. The
device keys STB – VIDEO – AUDIO can be reassigned to operate
different Loewe devices.
Press the required device key and the STOP key
simultaneously for 5 sec. until the corresponding LED
display flashes twice.
Then enter the two-digit device code from the list below.
The corresponding LED indicator light flashes twice.
Unit
Loewe ViewVision 8106 H
Loewe Viewvision, Centros 21x2
Loewe ViewVision DR + DVB-T
Loewe Auro 2216 PS/8116 DT
Loewe BluTech Vision Interactive
Loewe Sound Projector
SetTopBox (STB) data base
Loewe TV - Digital radio
Loewe Mediacenter
Loewe BluTech Vision 3D
HDMI CEC mode
Loewe AudioVision
Loewe Individual Sound Projector ID
Apple IR codes
Apple IR codes (Apple TV-2G)
Loewe Soundbox
Loewe SoundVision
Loewe AirSpeaker
Loewe Soundport
Loewe MediaVision 3D
Restore defaults
The codes shown here only apply to direct operation of the auxiliary
device device.
The available codes may vary depending on the status of the firm-
ware in the remote control.
Code Factory setting
10
12
13
14
15
17
18 STB
19 Audio
20
21 VIDEO
22
24
25
26
27
28
29
30
31
35
99