Loewe Reference lD 55 User Manual page 120

Reference ID 40-55
User guide
System settings
Connections
Adjusting the speaker system
Sound playback via ... – Speaker system
Enter here that you want to hear the TV sound over a speaker system. If
you connect active speakers, please use the setting Speaker system.
For information on navigation within the wizard see chapter General
information on menu operation.
When setting up the speaker system for the first time, the configura-
tion starts with the step Connect front speakers.
Speaker system was selected in the Sound components wizard.
Configuration/
Speaker system
modification
... Sound com- Please specify whether you want to change the illustrated setting of your
speaker system or whether all existing settings are to be reset to the values
ponents
of the delivery state.
Note: The newly selected parameter must be confirmed with the
button.
100Hz
100Hz
Configuration/modification
Back with
If you want to set up or change a speaker system:
Select Configuration/modification.
If nothing has been set yet, the factory settings
or otherwise the last set values are displayed.
OK Confirm selection.
Configuration/
Configuration/modification of speaker system
Please specify here whether you wish to fully set up a speaker system for
modification ... Sound com-
the first time or wish to completely modify an existing one or whether you
ponents
wish to restrict yourself to changing the speaker connections, changing
the distances of the speakers from the listening position or altering the
individual volume levels.
Note: The newly selected parameter must be confirmed with the
button.
Complete
Connections only
Distances only
Levels only
Back with
Select Complete.
OK Confirm selection.
Proceed to connect and set the front speakers.
Connect front speakers
Connect
Please specify here whether you wish to use
... Sound com-
front
the TV speakers or external front speakers as
ponents
front speakers. In the latter case, their lower
speakers
limit frequency must be entered in Hz (see
instruction manual and technical data of the
speakers).
TV speakers
20 Hz
Back with
Select External speakers or TV speakers.
For External speaker go to the frequency bar
below and
set the lower limit frequency of the external
front speakers in steps of 10 Hz.
120
OK
Components Distances Level
TV TV TV
90Hz 100Hz 0dB 0dB 0dB
4,0m 3,0m 4,0m
3,9m 0dB
100Hz 0dB 0dB
2,0m 2,0m
Reset to factory settings
OK
End with
100Hz 100Hz 100Hz
100Hz 100Hz
External speakers
100 Hz 200 Hz
Proceed with
Select the start value of the frequency response of
the speakers for the correct setting (e.g., 50Hz for
t h e s p e c i f i c a t i o n " Fre q u e n c y re s p o n s e
50-20,000Hz"). See the technical data of the speak-
ers for the value.
You can replace the external front speakers by the
TV speakers if necessary. In this case, TV speakers.
Then, the TV speakers transmit the sound of the
front speakers.
Proceed to connect and set the surround speakers.
Connect surround speakers
Connect
... Please specify here whether you want to
Sound com-
surround
connect external surround speakers. In this
ponents
case, their lower limit frequency must be
speakers entered in Hz (see instruction manual and
technical data of the speakers).
no yes
20 Hz
Back with
Select yes or no for the external surround speakers.
In case, external speakers were chosen as surround
speakers:
Select frequency bar
set the lower limit frequency of the surround
speakers in 10 Hz steps.
Select the start value of the frequency response of
the speakers for the correct setting.
Proceed to connect and set the centre speaker.
Connect
Connect centre speaker
centre Please specify here whether you wish to use a
... Sound com-
centre speaker. This function can be fulfilled by
ponents
the TV speakers, if they are not used as front
speaker
speakers, or by an external speaker. In the
latter case, its lower limit frequency must be
entered in Hz (see instruction manual and
technical data of the speakers).
no TV speakers
Back with
Select whether the TV speakers or an External
speaker is to reproduce the centre sound or no
if no centre speaker is connected.
If no centre speaker is connected, the front speakers
also transmit the centre sound parts additionally.
For External speaker go to the frequency bar
below and
set the Lower Limit Frequency of the external
front speakers in steps of 10 Hz.
Select the start value of the frequency response of
the speakers for the correct setting.
Proceed to connect the Subwoofer.
100Hz 100Hz 100Hz
100Hz 100Hz
100 Hz 200 Hz
Proceed with
TV
100Hz 90Hz 100Hz
100Hz 100Hz
External speaker
Proceed with
continued on the next page