Table 16 - Calibration Menus - Honeywell SMV800 SmartLine User Manual

<Return> Return to the Level 1 menu
Write hours,
Set Time
minutes, years
Stamp ***
month, day
Set Time Stamp*
DP/SP Zero
Do DP/SP Zero
Correct
Correct
Set Time Stamp*
DP/SP LRV
Do DP/SP LRV,
Correct
Correct
Set Time Stamp*
DP/SP URV
Do DP/SP URV
Correct
Correct
Set Time Stamp*
DP/SP Reset
Do DP/SP Reset
Correct
Correct
Temp Cal Pts Temp Cal Lo Pt
*** Temp Cal Hi Pt
Set Time Stamp*
DO Temp Cal Lo
Temp Cal (Lo,
Hi) Corr
DO Temp Cal Hi
Set Time Stamp*
Temp Reset
Corr
Reset Temp Corr
Revision 10
Table 16 – Calibration Menus
Hour, Minute, Year, Month, Day
Hour, Minute, Year, Month, Day
Execute these methods to perform a user zero
calibration on the DP or SP inputs
Hour, Minute, Year, Month, Day
Executing this method corrects the LRV based
on the input pressure, performing a user
calibration on the configured LRV with respect
to applied input pressure.
Hour, Minute, Year, Month, Day
Executing this method corrects the URV based
on the input pressure, performing a user
calibration on the configured URV with respect
to applied input pressure.
Hour, Minute, Year, Month, Day
Execute these methods to reset all DP or SP
user calibration, which will return the device to
original factory calibration.
These values represent the Calibration Low
and Calibration High values used when
executing Temperature Calibration Low Correct
and Temperature Calibration High Correct
methods.
Hour, Minute, Year, Month, Day
Execute this method to perform a user
calibration on the configured Temp Cal Lo
Point with respect to applied input pressure.
Execute this method to perform a user
calibration on the configured Temp Cal Hi Point
with respect to applied input pressure.
Hour, Minute, Year, Month, Day
Execute this method to reset all temperature
user calibration, which will return the device to
original factory calibration.
SMV800 Transmitter User's Manual
Press  to
enter menu
selection
Scroll to DP
URV Correct
Press  to
initiate
Page 45