Honeywell SMV800 SmartLine User Manual page 61

Base Unit ***
Flow
Parameters
Conv Factor ***
Flow URL
Flow URL
Flow URV Flow URV
Flow LRV
Flow LRV
Cutoff Hi Lim
Flow Cutoff
Cutoff Low Lim
Key:
Parameters in Italics are read-only.
* HART only
** HART and DE
*** HART and Modbus
Revision 10
Flow base unit when user selects a custom
unit. Unit from which the custom unit is
derived.
Conversion factor when user selects a
custom unit. A numeric value that represents
the number of base units per one custom
unit.
Displays the value entered for the flow Upper
Range Limit in the flow units selected above.
Displays the value entered for the flow Upper
Range Value in the flow units selected
above.
Displays the value entered for the flow Lower
Range Value in the flow units selected
above.
Enter the values desired for the low and high
flow cutoff breakpoint limits.
SMV800 Transmitter User's Manual
Press  to enter
menu selection
and  to select
number.
 to enter and shift
to next digit
Read only
Press  to enter
menu selection
and  to select
number.
 to enter and shift
to next digit
Page 53