Button Operation During Monitoring - Honeywell SMV800 SmartLine User Manual

Display Indicator
Process Variable Tag
Engineering Units
Square Root Output
(Not applicable for
Modbus)
Bar Graph
Trend Graph

9.4.2 Button operation during monitoring

When the operator screens are active on the display, the Increment and Decrement buttons (
and ) can be used to move to the next or previous operator screen without waiting for the
rotation time to expire. Pressing the Enter button (
Page 62
What It Means
User Configurable. This field has 14 characters
User Configurable. This field has 8 characters
Pressure:
atm
bar

ftH2O @ 68 F
gf/cm2

inH2O @ 39 F

inH2O @ 60 F inH2O

@ 68 F inH2O @

0 C

inHg @ 32 F
kgf/cm2
kPa
mbar

mmH2O @ 4 C

mmH2O @ 68 F
mmHg @ 0 C
MPa
Pa
psi
Torr
This indicator is displayed when the Transfer Function of the transmitter is
set to "Square Root".
Note that this indicator is not displayed on the Trend screens.
The limits of the bar graph are user-configurable for each screen.
The limits of the trend graph are user-configurable for each screen.
The amount of time visible on the Trend graph is also configurable.
SMV800 Transmitter User's Manual
Temp: Mass FI
Units:
o C
o
F
See
o
R
for Mass Flow
K (Kelvin)

) will call up the Main Menu.
Volume FI
Units:
Table 27 Table 27
See
for Volume
Flow
Revision 10