Honeywell SMV800 SmartLine User Manual page 45

Multivariable transmitter
Hide thumbs Also See for SMV800 SmartLine:
Table of Contents

Advertisement

DP Zero Correct
DP Span Correct
Meter Body Input
Meter Body Temp
Meter Body
Comm
Pressure Fac Cal
***
Temperature Cal
Correct
Temp Module
Temp
Temp Input
Range
CJ Range
Temp Input
Temp Fac Cal
Temp Comm
Non-Critical
PV Out of Range
**
Comm Module
Temp **
Supply Voltage
DAC Temp Comp
**
Revision 10
OK
EXCESSIVE
OK
EXCESSIVE
OK
MB OVERLOAD
OK
OVER TEMP
OK
SUSPECT
OK
NO FACTORY
CAL
RESET
CAL ACTIVE
OK
OVER TEMP
OK
OUT OF RANGE
OK
OUT OF RANGE
OK
OPEN
OK
NO FACTORY
CAL
OK
SUSPECT
OK
OUT OF RANGE
OK
OVER TEMP
OK
LOW
HIGH
OK
NO
COMPENSATION
SMV800 Transmitter User's Manual
EXCESSIVE: Input applied
exceeds 5% of URL).
EXCESSIVE: Input applied
exceeds 5% of expected value (as
defined by URV).
MB OVERLOAD: Input to meter
body is too high
OVERTEMP: Meter body
temperature is greater than 125C
SUSPECT: The interface
between the Meter body and the
Electronics Module is
experiencing intermittent
communication failures.
The transmitter has not been
calibrated by the factory.
CAL ACTIVE: A user calibration
has been performed on the
temperature input
OVERTEMP: Temperature
Module temperature is greater
than 85C or less than -40C.
OUT OF RANGE: greater than
temperature URV or less than
temperature LRV
OUT OF RANGE: Cold junction
temperature is greater than 85C
or less than -40C
OPEN: Input is open.
The transmitter has not been
calibrated by the factory.
SUSPECT:
The interface between the
Temperature Module and the
Electronics Module is
experiencing intermittent
communication failures
(Temperature Module Unreliable
Communication)
OUT OF RANGE: PV value is too
high or too low. PV>URV or <LRV
OVERTEMP: communication
module temperature greater than
85C
LOW: Supply voltage is below the
low specification limit
HIGH: Supply voltage is above
the high specification limit.
The DAC has not been
compensated for temperature
effects. This is a factory operation.
Read only
Read only
Read only
Read only
Read only
Read only
Read only
Read only
Read only
Read only
Read only
Read only
Read only
Read only
Read only
Read only
Read only
Page 37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smv800

Table of Contents