Advanced Energy Thyro-PX User Manual page 56

®
Advanced Energy
9. Select Thyro-PX Power Controller #1→ Rect.
10. Enter the maximum DC output current for each rectifier under Imax_S1,
Imax_S2, and for B18C systems Imax_S3.
11. Click the save
12. Disconnect the USB cable from the master unit.
Slave Configuration
13. Connect to the slave unit via USB.
14. Open the unit in the Port Explorer.
15. Select Hardware config. (gen.)→ Basic configuration .
16. Select 1x 3-phase RECT (power units #1, #2, #3) from the drop-down list.
17. Select Card_S1 - dASM module slot
18. Select dASM module (RECT slave function) from the drop-down list.
19. Click the save
57010241-00B
icon.
icon.
Installation, Setup, and Operation
®
Thyro‑PX DC Power Controller
5‑20