Table of Contents
Advertisement
SAFETY
external installation.
Supply cords used with this machine shall be
•
oil-resistant, sheathed flexible cable not lighter
than ordinary polychloroprene or other
equivalent synthetic elastomer-sheathed cord
(code designation 60245 IEC 57) installed with
the proper cord anchorage to relieve conductors
from strain, including twisting, at the terminals
and protect the insulation of the conductors from
abrasion.
•
If the supply cord is damaged, it must be
replaced by the manufacturer, service agent, or
a similarly qualified person to avoid a hazard.
•
Secure supply cord ground lead to machine in a
3
location where if the cord is pulled the main
power leads become taut before the ground
lead can break loose.
Failure to follow these instructions may result in
electrocution. Contact your local authorized Taylor
distributor for service.
IMPORTANT! Access to the service area of
the machine is restricted to persons having knowledge
and practical experience with the appliance, as far as
safety and hygiene are concerned.
3-2
WARNING! DO NOT use a water jet or spray
excessive water on or anywhere near the machine.
Failure to follow this instruction may result in serious
electrical shock and cause permanent electrical and
mechanical damage to internal parts.
Failure to follow this instruction may result in:
•
•
•
destroying electrical components
WARNING! DO NOT use cold water or ice to
cool the upper platen or the lower cook surface. Failure
to follow this instruction may result in:
•
•
•
destroying electrical components
CAUTION!
•
DO NOT store flammable vapors, liquids, or
combustible material in the vicinity of the
machine.
•
Appropriate clearance must be maintained.
Failure to comply could result in a fire hazard.
Model L850, L852, L858 Series
Serious electrical shock
Burns from hot steam
Liquid collecting inside the machine and
Serious electrical shock
Burns from hot steam
Liquid collecting inside the machine and
Safety
Advertisement
Table of Contents
