Figure 6-16
15. Once both grills are clean replace the clean rear
splash guards and re-insert the grease cans ensuring
the cans are pushed back and lock in place, Apply a
small amount of fresh fryer oil to the bottom grill
surfaces spreading the oil evenly with paper towels.
This will prevent the grill from rusting over time. See
Figure 6-17
Figure 6-17
Operating Procedures
Note: When moving the grills to clean the floors
underneath be careful not to pull the power cords from
the ceiling or wall.
Model L850, L852, L858 Series
OPERATING PROCEDURES
Figure 6-18
6
6-5