Making Adjustments - Brother NQ3700D Operation Manual

a Press .
b Select a stitch.
c Press to display editing screen, and then press
 The next stitch pattern will move to the right.
d Press to display the previous screen, and select the
same stitch again.
e Press to display editing screen again, and then
press .
 The next stitch pattern will move to the left.
f Press .
 The entered stitch pattern is repeated.

Making Adjustments

Your stitch pattern may sometimes turn out poorly, depending
on the type or thickness of fabric, the stabilizer material used,
sewing speed, etc. If your sewing does not turn out well, sew
trial stitches using the same conditions as the real sewing, and
adjust the stitch pattern as explained below. If the stitch
pattern does not turn out well even after making adjustments
based on the stitch pattern described below, make
adjustments for each stitch pattern individually.
. Memo
• This adjustment can be made to
stippling stitch),
patterns from the following categories.
Press and select
a
b Attach monogramming foot "N" and sew the stitch
pattern.
Note
• Be sure to use monogramming foot "N".
Adjustments may not be made correctly with any
other presser foot.
c Compare the finished stitch pattern to the illustration
of the correct stitch pattern below.
d Press , and then adjust the stitch pattern with the
[Fine Adjust Verti.] or [Fine Adjust Horiz.] displays.
(page 1 of the settings screen)
If the stitch pattern is bunched:
Press in the [Fine Adjust Verti.] display.
 The displayed value increases each time the key is
pressed and the stitch pattern will lengthen.
Making Adjustments
(1-35 Quilting
(4-15 eyelet stitch) and stitch
(6-80).
73
3