Strong SRT 8541FTA User Manual page 21

Program Lock:
Program Lock age:
PIN Code Change:
Old PIN Code:
New PIN Code:
Confirm:
7.3.5 Time Settings
Here you can set up your time zone for clock/time in your menu and system.
Use pq to move the highlight to the setting of choice. Values can be changed with t u. Press 
to leave.
GMT Usage:
GMT Offset:
Daylight Saving:
7.3.6 Timers
This menu allows you to set up to 10 timed events for waking up the receiver.
Use pq to select Timer from the Settings menu and press OK to enter.
The receiver will display a list with 10 timers, followed by their respective status. Select the timer you
wish to set or change with pq and press OK to proceed.
The timer setup menu will now be displayed.
The following settings are available:
Timer Status:
Timer Action:
Channel:
Start Date:
Start Time:
Duration:
Switch all programme/channels lock to On or Off. If the lock is set in the TV or
Radio Manager menu. You can select the lock separately for every channel
which you like to protect it with a PIN code.
Choose between: Off Lock None, Lock All, 4 years and up to 18 years. Channels
with a parental rating above the chosen age will be protected with a PIN
code (if available in your local broadcast.)
Press OK to enter the menu.
Enter your current PIN code (4 digits).
Enter your new PIN code (4 digits) you'd like to use.
(Make a note of it.)
Re-enter your new PIN code to confirm. Press OK to end and save the change.
Set to Auto for broadcaster defined time depending of country selection you
made in the First Installation Wizard. Normally, the clock/time will be correct
and also follow up the summer time changes automatically. In some regions
close to neighbouring countries it can happen that the wrong time zone is
followed. In this case select the option User Defined to set up time manually in
the next steps below.
Allows you to adjust the time zone you live in. This option is only available
when GMT Usage is set to User Define.The GMT Offset range is "-11:00 ~
+12:00".
Select Off or On to add one hour extra for summer time.
Choose between Once, Monday ~ Friday, Daily and Weekly Timer or select Off,
then Timer will execute the scheduled event.
Select Booking to wake-up the receiver and switch to the selected channel.
Select Recording to start record from the selected event to an externally
connected USB device.
Press OK to open the channel list and use pq to select the channel where
the timer will wake up with.
Use the 0~9 buttons to enter the date for the timed event.
Use the 0~9 buttons to enter the start time.
Use the 0~9 buttons to enter the timer duration.
17