Variable Frequency Drive Indicators - Dexter Laundry T-300 Operators Manual Installation & Operation Instructions

7.2.4 Variable Frequency Drive Indicators

There are three small colored LEDs located on the upper region of the Variable Frequency Drive
(VFD). They are labeled as "READY", "RUN", and "FAULT" and can be used for troubleshooting.
The definitions of the LEDs are listed in Table 1 below.
Figure 7-40 VFD Indicator LEDs
LED Status
Steady Yellow
Blinking Yellow
Steady Yellow
Steady Yellow
Blinking Yellow
Steady Green
Steady Red
Blinking Red
Table 7-2 VFD Indicator LEDs
8514-300-001 REV PR
WARNING
SHOCK HAZARD! IF THERE IS
NO POWER TO THE
CONTROL IT DOES NOT
MEAN THE UNIT HAS NO
POWER.
Washer Condi on
Tumbling
Stop from Tumble
Ramp to Intermediate or Final Extract Spin
Spinning (Intermediate or Final)
Stop from Spin (Intermediate or Final)
Idle Mode (No Cylinder Movement)
VFD fault
VFD warning
67