Dexter Laundry T-300 Operators Manual Installation & Operation Instructions page 81

2. "Sounds"- If the user programs the Sounds to "OFF", the control will not sound the
enunciator at the end of a wash cycle. The factory default is "ON".
3. "Password"- If the user programs the password to any value other then 0000, the
control will prompt the user to enter a password (the programmed value) before manual
programming can be accessed. The factory default is "0000" (no password).
a. Note: If the user forgets the Password, it can be reset to factory default (no
password), by performing a hard reset on the control. Please refer to the
appropriate section of this manual to understand how to perform a hard reset.
b. The individual digits of the Password can be set by using the "Up" or "Down"
buttons to change the number that is flashing. Once the desired number is
chosen for a single digit, press the "Enter" button to move to the next one. Once
all four desired digits are chosen, the "Enter" button must be held down for 3
seconds to confirm that the complete password should be set.
4. "Language"- The control uses English for the default language of the customer prompts.
Alternatively, the user can choose Spanish, French, Malay, Italian or Greek for the
customer display prompts. However, all other prompts, such as Manual Programming,
USB Programming and any Error Codes will still display in English.
5. "Shift Hours"- This feature allows the user to shift the time used by the control from the
time kept internally by the control. The control uses a Real Time Clock (RTC) to
internally track the time and date. The RTC continues operation even if the control loses
external power. The RTC is set for Central Standard Time and no daylight savings.
Because the machine may be located in another time zone, the user can choose to
create an alternate time & date that tracks in parallel to the RTC. When this alternate
time is chosen, or shifted from the RTC, the alternate time will be used to, for example,
track error code occurrences and set time-of-day pricing changes.
a. The hours in "SHIFT HOURS" can be set by using the "Up" or "Down" buttons to
change the number that is flashing. Once the desired hour shift is chosen, press
the "Enter" button to move to the minutes. Once the hours and minute shift are
both chosen, the "Enter" button must be held down for 3 seconds to confirm that
the complete shifted time is set.
6. "Time"- The control uses a Real Time Clock (RTC) to internally track the time and date.
The RTC continues operation even if the control loses external power. The RTC is set for
Central Standard Time and no daylight savings. However, if a problem occurs and the
RTC time is not accurate, it can be reset to the current time using this option.
a. The hours in "TIME" can be set by using the "Up" or "Down" buttons to change
the number that is flashing. Once the desired hour is chosen, press the "Enter"
button to move to the minutes. Once the hours and minute are both chosen, the
"Enter" button must be held down for 3 seconds to confirm that RTC is meant to
be reset to the complete entry.
8514-300-001 REV PR
81