Programming; Vended Washer Manual Programming - Dexter Laundry T-300 Operators Manual Installation & Operation Instructions

7.4 Programming

The washer control can be programmed to prompt the user for alternate vend prices, change
washer cycle times, temperatures and many other options. This can be accomplished in two
ways:
1. Manual programming utilizing the "Start", "Hot", "Warm" and "Cold" buttons
2. USB download of a customizable User File. For instructions on using the USB download
feature, please contact your local Dexter distributor or visit dexterlive.com. (Option 2 is
not available on "C5" models)

7.4.1 Vended Washer Manual Programming

The washer must be in idle mode for the manual programming menus to be accessed. Idle
mode is when the washer is not actively running a wash cycle and the vend price is displayed
on the screen.
To enter the manual programming mode, for standard washers, the top of the washer must be
unlocked and lifted slightly (it may be necessary to remove the screws for the soap box). The
programming button is then pressed for 1 second. The control should display "PROGRAMMING".
Figure 7-41 Loca on of Programming Bu on (The USB port is exposed when the washer top is li ed)
8514-300-001 REV PR
70