Moun Ng Height - Dexter Laundry T-300 Operators Manual Installation & Operation Instructions

Allow a minimum 610 mm (24 inches) of clearance behind the rear of the machine to provide
access for motor service.
Installation on an isolated pad is NOT recommended. Consult a structural engineer for
installations that will not be tied to a surrounding floor.

7.1.2 Moun ng Height

A concrete pedestal or steel-mounting base that elevates the machine above the floor level is
suggested to provide easy access to the loading door.
Suggested Amount to Elevate Washer:
T-300/350: approximately 203 mm (8 inches)
T-400/450/600: approximately 152 mm (6 inches)
T-650/750/900: approximately 102 mm (4 inches)
T-350 SWD: approximately 203 mm (8 inches)
T-450 SWD: approximately 152 mm (6 inches)
Contact a Dexter laundry equipment distributor for recommended steel mounting bases.
Available steel mounting bases:
Washer
T-300
T-300
T-350
T-400
T-400
T-450
T-600
T-650
T-750
T-900
T-900
T-350 SWD
T-450 SWD
T-450 SWD
8514-300-001 REV PR
CARE MUST BE STRESSED WITH ALL
FOUNDATION WORK TO ENSURE A
STABLE UNIT INSTALLATION,
ELIMINATING POSSIBILITIES OF
EXCESSIVE VIBRATION.
Part Number
9945-094-003
9945-094-004
9945-121-001
9945-089-001
9945-089-002
9945-123-001
9945-098-001
9945-145-001
9945-117-001
9945-103-001
9945-118-001
9945-151-001
9945-110-001
9945-111-001
WARNING
Height
203 mm (8 inches) Single Base
203 mm (8 inches) Double Base
203 mm (8 inches) Single Base
152 mm (6 inches) Single Base
152 mm (6 inches) Double Base
152 mm (6 inches) Single Base
152 mm (6 inches) Single Base
152 mm (6 inches) Single Base
152 mm (6 inches) Single Base
103 mm (4 inches) Single Base
152 mm (6 inches) Single Base
6" (152 mm)
4" (102 mm)
6" (152 mm)
20